Best Decks & Fences Contractors in Dartmouth, NS
2 decks & fences contractors found in Dartmouth
Skyfall Home & Property Contracting
Dartmouth, NS
Ratings aggregated by AI and may contain inaccuracies.
PTM Construction
Dartmouth, NS
Ratings aggregated by AI and may contain inaccuracies.
How much does decks & fences cost in Dartmouth?
Most Canadian homeowners spend $5,000-$9,000 on a typical deck or fence - a standard 200 sq ft pressure-treated wood deck, or about 150 linear feet of cedar privacy fence, both around $7,000 installed. Pressure-treated decks run $25-$45 per square foot and cedar fencing $30-$60 per linear foot; upgrading to low-maintenance composite decking ($40-$70/sq ft) or vinyl fencing pushes a project to $11,000-$15,000, while a basic chain-link fence ($20-$40/linear ft) comes in lower.
In Dartmouth, NS, typical quotes tend to track the Canadian average, so the table below shows these national figures unchanged.
What moves the price: The low end is a basic chain-link fence or a pressure-treated wood deck; the top end is low-maintenance composite decking or vinyl fencing.
| Project | Typical cost in Dartmouth |
|---|---|
| Pressure-treated wood deck (installed) | $35 $25 to $45 per sq ft |
| Composite / PVC deck (installed) | $52 $40 to $70 per sq ft |
| Standard 200 sq ft pressure-treated deck (whole project) | $7,000 $5,000 to $9,000 per project |
| Standard 200 sq ft composite deck (whole project) | $11,500 $8,500 to $15,000 per project |
| Cedar / wood privacy fence (installed) | $45 $30 to $60 per linear ft |
| Chain-link fence (installed) | $28 $20 to $40 per linear ft |
| Vinyl / PVC fence (installed) | $50 $35 to $70 per linear ft |
| Typical backyard fence, ~150 linear ft cedar (whole project) | $7,000 $5,000 to $9,000 per project |
How decks & fences prices vary across Canada
Big cities run meaningfully higher. Toronto, Vancouver and Calgary typically land about 15-30% above the national average, driven by higher labour rates, permit fees and demand - Vancouver and Toronto are usually the priciest. Smaller cities and rural areas tend to sit at or slightly below the national average, though remote and northern communities can run higher because of material shipping and a very short build season. Because deck and fence work is seasonal in Canada, expect peak pricing in spring and early summer and better rates in the fall shoulder season.
These are typical Dartmouth-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from the 2 decks & fences contractors listed in Dartmouth above.
Frequently Asked Questions about Decks & Fences in Dartmouth
How much does decks & fences cost in Dartmouth?
The cost of decks & fences services in Dartmouth, NS varies depending on the scope of work. Post your project on Bidmii to receive free, competitive quotes from local professionals.
How do I find a licensed decks & fences contractor in Dartmouth?
Browse our directory of decks & fences contractors in Dartmouth above. Look for contractors with the Verified badge, which means their identity has been confirmed. You can also check ratings aggregated from multiple platforms.
How many decks & fences contractors are in Dartmouth?
Bidmii currently lists 2 decks & fences contractors in Dartmouth, NS. Our directory is growing — create a free listing if you're a contractor.
How much does a typical backyard fence cost in Canada?
Most average urban backyards run about $5,000–$9,000 for roughly 150 linear feet of 6 ft cedar or vinyl fencing, including a gate or two. A basic chain-link or short pressure-treated wood run can come in closer to $3,000–$5,000. The final price mostly tracks the material you pick, the height, and how many gates you need.
Do I need a permit to build a deck or fence?
Often, yes. Many Canadian municipalities require a building permit for decks above a certain height off the ground, and most have rules on fence height that differ between front and back yards. The exact thresholds and fees vary by city, so check with your local building department before you start — it's a quick call and cheaper than fixing a non-compliant build later.
What's the cheapest way to add a deck or fence?
For a deck, a simple ground-level pressure-treated build is the budget option. For a fence, chain-link or basic pressure-treated wood is cheapest. Keeping the design simple — a plain rectangle, a single level, and as few gates and stairs as possible — and booking in the shoulder season rather than peak spring keeps the price down.