Best Insulation Contractors in Acton, ON

1 insulation contractors found in Acton

Need a insulation in Acton? Get free quotes from top-rated pros.

Get Free Quotes
a

Prestige Cleaning Company

Acton, ON

No ratings yet
interior painting & wallpaperplumbingelectricalframingstairs & railingsflooringcarpentryhvacdrywallingdemolitioninsulationwindow & door installationwaterproofingdecks & fenceslandscapingconcretecleaninghandyman servicessidinggeneral contractingwindow cleaningroofingcarpetlawn care serviceswett certifiedexterior painting & stainingmasonryjunk removalexterior cleaning & maintenancedrivewaysfoundationswifi & network installermovingmillworkcarpet cleaninginterior designtree removaltiling

Ratings aggregated by AI and may contain inaccuracies.

How much does insulation cost in Acton?

Most Canadian homeowners spend $1,800-$4,500 to insulate a typical attic in 2026 - a blown-in top-up to R-60, or about $1.50-$3.00 per square foot installed - with the average job landing near $2,800, before rebates. Batt insulation for walls runs a similar $1.50-$3.00/sq ft, while closed-cell spray foam is the premium option at $3.00-$7.00/sq ft. Whole-home spray-foam packages commonly run $3,000-$12,000.

In Acton, ON, typical quotes often come in a little below the Canadian average, so the table below shades these national figures down by roughly 5-10%.

What moves the price: The low end is a blown-in attic top-up or basic batts; the top end is closed-cell spray foam and whole-home packages, plus removal of old insulation first.

Project Typical cost in Acton
Blown-in attic insulation (loose-fill fibreglass or cellulose) $1.75 $1.25 to $2.75 per sq ft
Blown-in attic top-up to R-60 - typical home (900-1,500 sq ft attic) $2,600 $1,600 to $4,300 per project
Batt insulation (fibreglass or mineral wool) - walls $2 $1.25 to $2.75 per sq ft
Open-cell spray foam (0.5 lb) $2.25 $1.25 to $3.25 per sq ft
Closed-cell spray foam (2.0 lb) - basements, rim joists, cathedral ceilings $4.25 $2.75 to $6.75 per sq ft
Basement wall insulation - full basement (800-1,000 sq ft) $3,700 $2,300 to $6,000 per project
Remove old / contaminated insulation before re-insulating $1.50 $1 to $2.50 per sq ft
Whole-home spray foam package (attic + walls + basement) $6,500 $2,700 to $11,500 per project

What changes the price of insulation in Acton

  • Air sealing and prep: sealing gaps, adding vent baffles, and boxing out around pot lights and the attic hatch before insulating adds materials and time but is usually worth it.
  • Area size and rebates: a bigger area costs more up front, but provincial and utility rebates can claw back $1,000 to $7,700 of the net cost in some provinces.
  • Insulation type: batt is cheapest, blown-in is mid-priced, and closed-cell spray foam is the most expensive - often 2 to 4 times the cost of batt for the same area.
  • R-value target: pushing an attic to R-60 versus a lighter R-40 top-up means more material and more depth, which adds cost.
  • Removing old insulation: clean, dry insulation can usually be topped up, but wet, mouldy, rodent-damaged, or old vermiculite material must be removed first, adding roughly $1.00-$2.50 per sq ft (more if hazardous-material handling is needed).
  • Attic access and layout: low-pitch roofs, tight crawl spaces, dormers, and multi-level attics slow the crew down and push labour up.

How insulation prices vary across Canada

Toronto, Vancouver, and other big metros run roughly 10-25% higher than small-town and rural pricing, almost entirely on the labour portion - material costs barely move. One important caveat: attic insulation is heavily rebate-driven in the GTA, so some contractors advertise very low headline prices (as low as about $0.99 per sq ft) that already net out the rebate. Treat those as marketing figures, not the true base install cost - the real pre-rebate range still sits in the $1.50-$3.00 per sq ft band.

These are typical Acton-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from the 1 insulation contractor listed in Acton above.

Frequently Asked Questions about Insulation in Acton

How much does insulation cost in Acton?

The cost of insulation services in Acton, ON varies depending on the scope of work. Post your project on Bidmii to receive free, competitive quotes from local professionals.

How do I find a licensed insulation contractor in Acton?

Browse our directory of insulation contractors in Acton above. Look for contractors with the Verified badge, which means their identity has been confirmed. You can also check ratings aggregated from multiple platforms.

How many insulation contractors are in Acton?

Bidmii currently lists 1 insulation contractor in Acton, ON. Our directory is growing — create a free listing if you're a contractor.

How much does it cost to insulate an attic in Canada?

For a typical home in 2026, a blown-in top-up to R-60 usually runs about $1,800-$4,500 installed, or roughly $1.50-$3.00 per square foot. Spray foam costs more, and rebates can lower your final out-of-pocket cost.

Is spray foam worth the extra cost over blown-in?

Closed-cell spray foam costs about 2 to 4 times more, but it seals air leaks, blocks moisture, and gives the highest R-value per inch - which makes it the go-to for basements, rim joists, and cathedral ceilings. For an open, walk-around attic floor, blown-in usually gives better value for the money.

Are there rebates for insulation?

Often yes, depending on your province and utility. In Ontario, for example, programs available in 2026 can return up to about $1,250 for a standalone attic job, or more when bundled with an energy assessment. Rebate programs change frequently, so confirm what is currently offered before you book.