Best Decks & Fences Contractors in Burnaby, BC
1 decks & fences contractors found in Burnaby
Terrene Renovations
Burnaby, BC
Ratings aggregated by AI and may contain inaccuracies.
How much does decks & fences cost in Burnaby?
Most Canadian homeowners spend $5,000-$9,000 on a typical deck or fence - a standard 200 sq ft pressure-treated wood deck, or about 150 linear feet of cedar privacy fence, both around $7,000 installed. Pressure-treated decks run $25-$45 per square foot and cedar fencing $30-$60 per linear foot; upgrading to low-maintenance composite decking ($40-$70/sq ft) or vinyl fencing pushes a project to $11,000-$15,000, while a basic chain-link fence ($20-$40/linear ft) comes in lower.
In Burnaby, BC, typical quotes tend to come in above the Canadian average, so the table below nudges these national figures up by roughly 15% at the low end of each range and up to 30% at the top end.
What moves the price: The low end is a basic chain-link fence or a pressure-treated wood deck; the top end is low-maintenance composite decking or vinyl fencing.
| Project | Typical cost in Burnaby |
|---|---|
| Pressure-treated wood deck (installed) | $43 $29 to $60 per sq ft |
| Composite / PVC deck (installed) | $60 $46 to $90 per sq ft |
| Standard 200 sq ft pressure-treated deck (whole project) | $8,500 $6,000 to $11,500 per project |
| Standard 200 sq ft composite deck (whole project) | $14,000 $10,000 to $19,500 per project |
| Cedar / wood privacy fence (installed) | $60 $35 to $80 per linear ft |
| Chain-link fence (installed) | $34 $23 to $50 per linear ft |
| Vinyl / PVC fence (installed) | $60 $40 to $90 per linear ft |
| Typical backyard fence, ~150 linear ft cedar (whole project) | $8,500 $6,000 to $11,500 per project |
How decks & fences prices vary across Canada
Big cities run meaningfully higher. Toronto, Vancouver and Calgary typically land about 15-30% above the national average, driven by higher labour rates, permit fees and demand - Vancouver and Toronto are usually the priciest. Smaller cities and rural areas tend to sit at or slightly below the national average, though remote and northern communities can run higher because of material shipping and a very short build season. Because deck and fence work is seasonal in Canada, expect peak pricing in spring and early summer and better rates in the fall shoulder season.
These are typical Burnaby-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from the 1 decks & fences contractor listed in Burnaby above.
Frequently Asked Questions about Decks & Fences in Burnaby
How much does decks & fences cost in Burnaby?
The cost of decks & fences services in Burnaby, BC varies depending on the scope of work. Post your project on Bidmii to receive free, competitive quotes from local professionals.
How do I find a licensed decks & fences contractor in Burnaby?
Browse our directory of decks & fences contractors in Burnaby above. Look for contractors with the Verified badge, which means their identity has been confirmed. You can also check ratings aggregated from multiple platforms.
How many decks & fences contractors are in Burnaby?
Bidmii currently lists 1 decks & fences contractor in Burnaby, BC. Our directory is growing — create a free listing if you're a contractor.
How much does a typical backyard fence cost in Canada?
Most average urban backyards run about $5,000–$9,000 for roughly 150 linear feet of 6 ft cedar or vinyl fencing, including a gate or two. A basic chain-link or short pressure-treated wood run can come in closer to $3,000–$5,000. The final price mostly tracks the material you pick, the height, and how many gates you need.
Do I need a permit to build a deck or fence?
Often, yes. Many Canadian municipalities require a building permit for decks above a certain height off the ground, and most have rules on fence height that differ between front and back yards. The exact thresholds and fees vary by city, so check with your local building department before you start — it's a quick call and cheaper than fixing a non-compliant build later.
What's the cheapest way to add a deck or fence?
For a deck, a simple ground-level pressure-treated build is the budget option. For a fence, chain-link or basic pressure-treated wood is cheapest. Keeping the design simple — a plain rectangle, a single level, and as few gates and stairs as possible — and booking in the shoulder season rather than peak spring keeps the price down.