Best Electrical Contractors in Richmond Hill, ON
15 electrical contractors found in Richmond Hill
Jay Home Renovation
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Tetra Group Corporation
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
ATLAS ELECTRIC INC.
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
24/7 Electrical Service inc
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Amir electric
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Green home and design
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
ATLAS ELECTRIC INC
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
abnar business infrastructure development inc
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Insuite hvac
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Altevita
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Golden power electric
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
PlugIn Electric Ltd
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Asri Design & Build
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
Wall Removal Masters
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
HKM renovation
Richmond Hill, ON
Ratings aggregated by AI and may contain inaccuracies.
How much does electrical cost in Richmond Hill?
Most Canadian homeowners pay $150-$400 for a common electrical job - installing an outlet, switch, or light fixture, or a small repair - including the service-call charge. Electricians bill roughly $80-$150 an hour with a $150-$300 minimum. Bigger projects cost far more: a 200A panel upgrade typically runs $2,500-$4,500 and a whole-home rewire $15,000-$30,000.
In Richmond Hill, ON, typical quotes tend to come in above the Canadian average, so the table below nudges these national figures up by roughly 15% at the low end of each range and up to 30% at the top end.
What moves the price: The low end covers small jobs on existing wiring like swapping an outlet, switch or light fixture; the top end is dedicated circuits, a panel upgrade or a whole-home rewire.
| Project | Typical cost in Richmond Hill |
|---|---|
| Service call / minimum visit (diagnosis or small repair, first hour + trip) | $180-$300 $110 to $525 per visit |
| Install or replace an outlet or switch (existing wiring in place) | $250-$300 $170 to $525 per unit |
| Install a light fixture or ceiling fan (existing box and wiring) | $180-$425 $110 to $775 per unit |
| Add a dedicated circuit or small subpanel (appliance, hot tub, workshop) | $725-$1,500 $350 to $2,600 per circuit / subpanel |
| Level 2 home EV charger installation (unit + labour + permit, before rebates) | $2,000-$3,700 $1,200 to $5,000 per project |
| Upgrade to a 200A electrical panel (panel, breakers, labour, permit, inspection) | $3,100-$5,500 $2,300 to $10,500 per project |
| Whole-home rewire / knob-and-tube or aluminum replacement | $18,500-$37,000 $9,000 to $65,000 per project (roughly $8-$22 per sq ft) |
What changes the price of electrical in Richmond Hill
- Labour rate, licence level, and timing. Master electricians and permit-required work cost more per hour, and emergency or after-hours calls carry a premium on top of the standard $80-$150/hr.
- Permits and inspection. Non-trivial work needs a permit and inspection (ESA in Ontario, provincial equivalents elsewhere), typically $250-$500 on larger jobs, plus utility disconnect/reconnect coordination on panel upgrades.
- Home age and access. Knob-and-tube or aluminum wiring, plaster walls, finished basements, and hard-to-reach runs all raise the hours needed and can trigger extra safety upgrades.
- Materials and fixture choice. Smart panels, premium EV chargers, high-end fixtures, and copper wire price swings all move the final total.
- Whether wiring already exists or new wire must be run. Swapping a device in an existing box is quick and cheap; fishing new cable through finished walls, long runs, or opening and patching drywall adds hours of labour.
- Panel capacity and condition. If your panel is full or maxed out, you may need a subpanel or a 200A upgrade before adding a big load like an EV charger or hot tub, which adds roughly $2,000-$4,000.
How electrical prices vary across Canada
Toronto and Vancouver run at the top of every range. Metro hourly rates ($95-$140+) sit roughly 15-30% above smaller-city and rural rates, and fixed-price jobs like panel upgrades and EV chargers land near or above the national high end. One BC-specific quirk: when the utility or meter base is involved, 200A panel upgrades in BC can reach $8,000.
These are typical Richmond Hill-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from the 15 electrical contractors listed in Richmond Hill above.
Frequently Asked Questions about Electrical in Richmond Hill
How much does electrical cost in Richmond Hill?
The cost of electrical services in Richmond Hill, ON varies depending on the scope of work. Post your project on Bidmii to receive free, competitive quotes from local professionals.
How do I find a licensed electrical contractor in Richmond Hill?
Browse our directory of electrical contractors in Richmond Hill above. Look for contractors with the Verified badge, which means their identity has been confirmed. You can also check ratings aggregated from multiple platforms.
How many electrical contractors are in Richmond Hill?
Bidmii currently lists 15 electrical contractors in Richmond Hill, ON. Our directory is growing — create a free listing if you're a contractor.
How much does an electrician cost per hour in Canada?
Most residential electricians charge about $80-$150 per hour, with major cities like Toronto and Vancouver at the higher end ($95-$140+). Expect a minimum service call fee of $150-$300 that covers travel and the first hour, even for a small job.
Do I need a 200A panel to install an EV charger?
Not always. Many homes with a 100A panel can add a Level 2 charger using load management to share existing capacity. But if your panel is full or already near its limit, budget an extra $2,000-$4,000 for a 200A upgrade on top of the charger install.
Do I need a permit for electrical work?
Yes for most work beyond swapping a fixture or outlet, including new circuits, panel upgrades, EV chargers, and rewires. In Ontario that means an ESA permit and inspection; other provinces have their own. A licensed electrician pulls the permit for you and usually builds it into the quote.