Best Concrete Contractors in Arthur, ON
0 concrete contractors found in Arthur
No concrete contractors found in Arthur
Try browsing all contractors in Arthur or post your project to get free quotes.
How much does concrete cost in Arthur?
Most Canadian homeowners pay $10-$16 per square foot installed for standard poured concrete flatwork - a plain or broom-finish driveway, patio, walkway or slab. Large simple pours drop toward $8/sq ft; decorative stamped or exposed-aggregate finishes run $16-$35. In whole-project terms, that puts most single-car driveways and mid-size patios between $4,000 and $8,000.
In Arthur, ON, typical quotes often come in a little below the Canadian average, so the table below shades these national figures down by roughly 5-10%.
What moves the price: The low end is a plain broom-finish pour; the top end is decorative stamped, coloured or exposed-aggregate finishes, plus tear-out of old concrete first.
| Project | Typical cost in Arthur |
|---|---|
| Plain poured concrete driveway | $11-$13 $7.25 to $19 per sq ft |
| Concrete driveway - full single-car project (~400 sq ft) | $4,600-$6,000 $3,600 to $7,500 per project |
| Concrete patio (plain broom finish) | $10-$12 $7.25 to $17 per sq ft |
| Concrete walkway / front sidewalk | $13-$15 $9 to $21 per sq ft |
| Concrete slab (garage floor, shed pad, general flatwork) | $9.25-$11 $6.25 to $15 per sq ft |
| Stamped concrete (patterned, coloured decorative) | $19-$22 $14 to $33 per sq ft |
| Exposed aggregate or coloured concrete | $15-$17 $11 to $24 per sq ft |
| Old concrete removal & disposal (tear-out before new pour) | $4.75-$5.50 $2.75 to $8.50 per sq ft |
What changes the price of concrete in Arthur
- Site prep and truck access - tearing out an old slab, regrading, soft or rocky soil, or a backyard the concrete truck can't reach (needing wheelbarrowing or a pump) all push the price toward the top of the range or beyond.
- Region and city - the Prairies and Atlantic Canada sit at the low end, while the Greater Toronto Area and BC's Lower Mainland run highest on both labour and ready-mix concrete.
- Ready-mix prices and season - concrete cost tracks cement and fuel prices, and cold-weather pours need heating blankets or additives that add to the bill.
- Size and shape of the pour - bigger jobs cost less per square foot because fixed costs (crew mobilization, forms, minimum concrete delivery, finishing) spread across more area; a short walkway carries a per-square-foot premium a large driveway doesn't.
- Finish type - a plain broom finish is the cheapest; colour or exposed aggregate adds a few dollars a square foot, and stamped patterns that mimic stone or brick can double or triple the per-square-foot price.
- Thickness and reinforcement - a 4-inch patio slab costs less than a 6-inch driveway built to carry vehicle weight, and wire mesh, rebar, or fibre reinforcement adds material and labour.
How concrete prices vary across Canada
Big cities cost noticeably more. Toronto (GTA) and Vancouver / BC's Lower Mainland typically run about 15-25% above the national average and above rural areas in the same province, driven by higher labour rates, demand, and pricier ready-mix (roughly $195-$230/m3 in the GTA and BC vs $160-$190/m3 on the Prairies). Calgary, Ottawa, and Montreal sit modestly above average, around 10-15%. Small-town Prairies, Quebec outside Montreal, and Atlantic Canada sit at or slightly below the national average.
These are typical Arthur-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from local pros.