Best Renovation Contractors in Delta, BC
0 renovation contractors found in Delta
No renovation contractors found in Delta
Try browsing all contractors in Delta or post your project to get free quotes.
How much does renovation cost in Delta?
Most homeowners spend $100-$200 per square foot on a full home renovation - roughly $40,000-$120,000 for a typical project. A light cosmetic refresh can run $15-$60/sq ft; a full gut to the studs reaches $150-$325/sq ft, or $150,000-$220,000+ on a whole 1,500-2,000 sq ft home.
In Delta, BC, typical quotes often come in a little below the Canadian average, so the table below shades these national figures down by roughly 5-10%.
What moves the price: The low end is a cosmetic refresh that keeps the layout, plumbing and wiring in place; the top end is a full gut to the studs with new systems throughout, plus the contractor's management fee on bigger scopes.
| Project | Typical cost in Delta |
|---|---|
| Full home renovation (mid-range) | $90-$140/sq ft $50 to $190 per sq ft |
| Cosmetic / surface refresh | $23-$42/sq ft $14 to $60 per sq ft |
| Full gut renovation (down to studs) | $190-$250/sq ft $140 to $300 per sq ft |
| General contractor management fee | 15-20% 10% to 25% of project cost |
| Whole-home renovation (typical home, total) | $139,000-$203,500 $81,000 to $285,000 total project |
| Kitchen renovation | $28,000-$51,000 $16,000 to $71,500 total project |
| Bathroom renovation | $16,500-$28,000 $11,000 to $38,000 total project |
| Basement finishing | $41,500-$69,500 $27,000 to $90,500 total project |
| Kitchen renovation (mid-range) | $39,000 $27,000 to $52,500 per project |
| Kitchen update (cosmetic) | $15,000 $9,000 to $24,000 per project |
| Full bathroom renovation (mid-range) | $17,500 $12,500 to $24,500 per project |
| Basement finishing (mid-range, per sq ft) | $70 $50 to $100 per sq ft |
What changes the price of renovation in Delta
- Permits, design, and project management: Structural changes need permits and sometimes an engineer or architect, and the contractor's management fee and design costs layer on top of construction.
- Scope - cosmetic vs. gut: Updating surfaces (paint, flooring, fixtures) costs a fraction of taking a space down to the studs. Removing or moving walls, especially load-bearing ones, is the single biggest swing in price.
- Kitchens and bathrooms: They pack plumbing, electrical, tile, cabinetry, and appliances into a small footprint, so they cost far more per square foot than bedrooms or living rooms.
- Finishes and materials: Laminate vs. custom cabinetry, porcelain vs. natural stone, builder-grade vs. designer fixtures can easily double or triple the cost of the same job.
- Moving plumbing, electrical, and HVAC: Relocating pipes, adding circuits, or upgrading an electrical panel brings in more trades and permits. Keeping fixtures where they are saves thousands.
- Age and condition of the home: Older homes hide surprises - knob-and-tube wiring, asbestos, mould, or out-of-code framing - that must be fixed before the visible work can start.
How renovation prices vary across Canada
Big cities cost more. Toronto and Vancouver typically run about 20-40% above the national average, driven by higher labour rates, permit costs, and demand. Calgary, Ottawa, and Montreal sit near or modestly above the national average. Smaller cities and rural areas can come in 10-20% lower. The same scope of work can swing 30-50% in total between a small town and downtown Toronto or Vancouver.
These are typical Delta-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from local pros.