Best Tiling Contractors in Beaumont, AB
0 tiling contractors found in Beaumont
No tiling contractors found in Beaumont
Try browsing all contractors in Beaumont or post your project to get free quotes.
How much does tiling cost in Beaumont?
Most Canadian homeowners pay $12-$22 per square foot installed (labour plus standard ceramic or porcelain tile) for a straightforward floor or wall - about $15/sq ft on a typical job. Basic ceramic in a simple straight lay starts near $8-$10; showers, natural stone, and intricate patterns like herringbone push it to $30-$65. In whole-project terms, a kitchen backsplash runs roughly $800-$1,600 and a fully tiled shower surround $2,500-$5,000.
In Beaumont, AB, typical quotes often come in a little below the Canadian average, so the table below shades these national figures down by roughly 5-10%.
What moves the price: The low end is standard ceramic or porcelain in a simple straight lay; the top end is showers and wet areas, natural stone, or intricate patterns like herringbone that need waterproofing and precision cuts.
| Project | Typical cost in Beaumont |
|---|---|
| Floor tile install - standard ceramic or porcelain, straight lay (labour + material) | $14 $7.25 to $24 per sq ft |
| Kitchen backsplash - typical 30-40 sq ft, installed | $1,300 $625 to $2,900 per project |
| Backsplash tile - per square foot installed | $26 $14 to $43 per sq ft |
| Tiled shower surround - full walls, standard size, installed (incl. waterproofing) | $3,200 $1,800 to $6,500 per project |
| Shower / wet-area tile - per square foot (waterproofing + precision cuts) | $32 $16 to $60 per sq ft |
| Complex pattern or large-format floor (herringbone, chevron, 24x24+) | $30 $18 to $48 per sq ft |
| Natural stone tile install (marble, travertine, slate) | $35 $20 to $60 per sq ft |
| Old tile removal + subfloor levelling (add-on) | $5.50 $2.75 to $11 per sq ft |
What changes the price of tiling in Beaumont
- Tile material and size - ceramic is the cheapest; porcelain, glass, and natural stone (marble, slate, travertine) cost more per square foot and are harder to cut. Both oversized large-format tiles and tiny mosaics raise labour.
- Pattern and layout complexity - a plain straight lay is cheapest. A diagonal layout adds roughly 15-25% to labour, and herringbone, chevron, or basketweave can add 30-50% because of the extra cuts and layout time.
- Wet areas need waterproofing - showers and tub surrounds require a waterproof membrane, a properly sloped base, and precise cuts around valves and niches, which is why tiling a shower costs roughly double tiling a flat floor per square foot.
- Surface prep and demolition - tearing out old tile, levelling an uneven subfloor, or repairing water-damaged walls are billed on top of the tile install, typically $3-$12 extra per square foot.
- Room size and number of cuts - small rooms with lots of corners, edges, fixtures, and niches mean more cuts per square foot, so a small bathroom often costs more per square foot than a large open floor.
- Location and installer demand - big-city labour rates and busy renovation seasons push quotes toward the top of the range.
How tiling prices vary across Canada
Big cities cost more, and it shows up mostly in labour, not materials. Tile prices are fairly consistent nationwide, but installer labour in the Greater Toronto Area and Metro Vancouver runs roughly 15-30% above small-town and rural rates, with Calgary, Ottawa, and Victoria a bit above average too. Atlantic Canada and smaller Prairie and rural markets tend to sit at the lower end of each range.
These are typical Beaumont-area price ranges based on 2026 Canadian market data, not quotes. Your actual cost depends on the size and details of your project. Post your project on Bidmii to get free quotes from local pros.